Repairing Slab Edges Made Easy

It is easier than you would imagine. 

1. Clean out the cavity.

2. Insert the aluminum-wrapped plywood spacer against best concrete slab edge.
If both slab edges need repair, aluminum-wrapped plywood spacer may be placed in middle of joint and Con-Patch applied on both sides.

3. Mix and place Con-Patch.

4. Smooth out Con-Patch as pictured.

5. Pull out plywood and remove as much aluminum foil as possible from the cavity.

Optional...
Install Flexible Joint Compound to prevent a cavity from becoming imbedded with soil—traffic rolling over trapped metal pieces is a major contributor to chipped slab edges.