Fast
Kill Ant & Roach Aerosol
Item Number: 2660-0709
U.S. Department Of Labor
Occupational Safety And
Health Administration
Required Under USDL
Safety And Health Regulations
(29 CFP 1910.1200
"Hazards Communication Standard")
Manufactured For: Gabriel First Corp.
Emergency Telephone:
1-800-424-9300
Address: 233 W Commercial Street East Rochester, NY 14445
Trade Name &
Synonyms:
Fast Kill
Prepared On: 04/05/200
HMIS
RATING
HEALTH FLAMMABILITY REACTIVITY MPP
2 2 0 B
Component(s)/ Chemical Names CAS
Registry No % PEL TLV
Petroleum Distillate 64742-88-7 90-95 500 100
Diazinon 333-41-5 <1 NE 0.1mg/m3
Pyrethrins 8003-34-7 <1 5mg/m3 5mg/m3
N-Octyl Bicycloheptene
Dicarboximide 113-48-4 <1 NE NE
Piperonyl Butoxide 51-03-6 <1 NE NE
Carbon Dioxide 124-38-9 1-5 10000 5000
Boiling Point: NA
Specific Gravity (H2O=1): <1
Vapor Pressure: 130@130F
Percent, Volatile By
Volume(%):
Vapor Density(Air=1): >1
Evaporation Rate: <1
Solubility In Water: Negligible
Appearance And Odor: Wet mist spray.
Lavender odor.
Special Fire Fighting
Procedures: Keep
containers cool. Use shielding to
protect personnel form bursting. At
elevated temperatures over 54C-130F containers may vent, rupture, or burst.
Flash Point/Method Used: None.
Flammable Limits: LEL: 1.0
UEL: 7.0
Extinguishing Media: Carbon Dioxide, foam,
dry chemical
Effects Of Overexposure:
Eyes: Irritates.
Skin: contact may cause
reddening and irritation.
Inhalation: may cause dizziness and
drowsiness.
Ingestion: not likely, but if
occurs, ingestion may result in vomiting which could cause aspiration
pneumonitis.
Emergency First Aid
Procedures:
Eyes: Flush eyes with water
for fifteen minutes. Remove contact
lenses prior to washing.
Skin: Remove contaminated clothing. Then wash with soap & water.
Inhalation: Remove victim to fresh
air. Give CPR if not breathing. Get
medical help.
Ingestion: Get medical
attention. Note to physician: There is
no specific antidote. Treatment of
overexposure should be directed at the control of symptoms and the clinical
condition.
Stability Conditions To Avoid
Stable
Materials
To Avoid: Strong oxidizing agents, reactive metals, heat,
and open flame.
Hazardous
Decomposition Products: Carbon Dioxide, carbon monoxide, and
additional toxic chemicals may be formed in small amounts.
Hazardous Polymerization Conditions
To Avoid
Will not occur Do not store
above temperatures above 54C-130F. Keep away from heat, direct sunlight, open
flames, or sparks. Dropping of containers may cause bursting.
Steps
To Be Taken In Case Material Is Released Or Spilled:
Remove sources of flame, spark, or heat.
Soak up spill with an inert absorbent and place into a designated
disposal container.
Waste
Disposal Method: Do not puncture or incinerate.
When contents are depleted continue to depress button until all gas is
expelled and dispose of container in accordance with local, state, and federal
regulations.
Respiratory
Protection(Type):
None required.
Ventilation: Local exhaust is
recommended.
Protective Gloves: Chemical Resistant.
Eye Protection: Chemical safety
glasses.
Other Protective
Equipment: Wear
impervious clothing.
Precautions To Be Taken
In Handling And Storing: Contents under pressure. Do not store where temperatures may
exceed 54C-130F. Avoid breathing vapor.
Keep away from heat or open flame.
Other Precautions: Please read the label
carefully, it is your best guide to using the product in the most effective
manner.
Supplier Notification
Under Section 313 of SARA
Pursuant
to Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA)
and 40 CFR Part 372, our product: Fast Kill contains toxic chemicals in
quantities subject to the reporting requirements under section 313(see below).
Effective January 1, 1989, any person who sells or otherwise distributes a
mixture or trade name product containing toxic chemicals must provide written
notice to the recipient with the first shipment in each calendar year. If the recipient repackages or otherwise
redistributes this product a notice indicating that this product is subject to
the reporting requirements of Section 313, including the reporting chemical
name/category, CAS number and percent by weight, must accompany the shipment. Please note that the notification letter
must be attached and remain attached to the Material Safety Data Sheet.
Chemical
name CAS Number % by Weight
Diazinon 333-41-5 <1
Piperonyl Butoxide 51-03-6 <1
This
information is given in good faith, but no warranty expressed or implied is made. Our company believes that it is accurate to
the best of its knowledge and relates only to the specific material designated
herein.