Anti-Bacterial Hand Cleaner

Item Number: 82001


U.S. Department Of Labor

Occupational Safety And Health Administration


Required Under USDL Safety And Health Regulations

(29 CFP 1910.1200 "Hazards Communication Standard")


Section I

Manufactured For: Gabriel First Corp.

Emergency Telephone:  1-800-424-9300

Address: 233 W Commercial Street East Rochester, NY 14445

Trade Name & Synonyms: Anti-Bacterial Hand Cleaner

Prepared On: 03/10/2005



1 0 0


Section II - Product & Component Data

Chemical Names CAS % PEL TLV

Surfactant Blend Mixture 25-30 None None

DMD Hydantoin 6440-58-0 .01 LD 50 (5.0g/Kg)

Fragrance Mixture 0.05 NE NE

Dye Proprietory Trace NE NE

Water 7732-18-5 70-75 None None


Section III - Physical Data

Boiling Point: 212 F

Specific Gravity (H2O=1): 1.0289

Vapor Pressure: N/D

Percent, Volatile By Volume(%): 90.0

Vapor Density(Air=1): >1

Evaporation Rate: (H2O=1): <1

Solubility In Water: Dilutable

Appearance And Odor: Clear, light amber color. Pleasant floral odor.

pH: 6.0-6.5


Section IV - Fire And Explosion Hazard Data

Special Fire Fighting Procedures: None.

Flash Point/Method Used: N/A.

Flammable Limits: N/A

Extinguishing Media: Non-flammable

Unusual Fire And Explosion Hazards: none.


Section V - Health Hazard Data

Effects Of Overexposure:

Eyes: Slight irritation to eyes.

Skin: May irritate on repeated or prolonged contact.

Ingestion: May cause irritation to mouth, throat and esophagus.

Inhalation: Vapor or mist can cause headache, nausea & irritation of eyes, nose, throat & lungs.

Medical Conditions Aggravated By Exposure: None.

Emergency First Aid Procedures:

Eyes: Flush with large amounts of water for at least 15 minutes. Get medical attention if redness


Skin: Wash affected area with soap and water.

Ingestion: Induce vomiting seek medical help.

Inhalation: Remove to fresh air. Get medical help if needed.


Section VI - Reactivity Data

Incompatibility - Materials To Avoid: Strong acids and bases.

Hazardous Decomposition Products: None known.

Hazardous Polymerization - Conditions to Avoid


Section VII - Spill Or Leak Procedures

Steps To Be Taken In Case Material Is Released Or Spilled: Small Spills: Absorb spill on inert material (sand, earth, etc.) and dispose of as waste material. Large Spills: Keep spectators away - Floors may be slippery. Use care to avoid falling. Dike and maintain spill with inert material. Transfer liquid to containers for recovery or disposal and solid diking material to separate containers for disposal. Keep spills and cleaning runoffs from municipal sewers and open bodies of water.


Waste Disposal Method: Coagulate the emulsion by stepwise addition of ferric chloride and lime. Remove the clear supernatant liquid and flush to a chemical sewer. Landfill or incinerate the solids and the contaminated diking material according to Federal, State and Local regulations.


Section VIII - Special Protection Information

Respiratory Protection(Type): None Required if good ventilation is maintained.

Ventilation: Mechanical local exhaust ventilation at point of contaminant release.

Protective Gloves: Impervious.

Eye Protection: Chemical Splash Goggles (ANS Z-81-1 or approved equivalent.

Other Protective Equipment: None


Section IX - Special Precautions

Precautions to be Taken in Handling or Storage: Keep out of reach of children. For use by trained personnel only. For institutional or industrial use only. Keep container closed during storage. Keep from freezing, Product may coagulate. Storage Temperature Max: 140F MIN: 34F



This information is given in good faith, but no warranty expressed or implied is made. Our company believes that it is accurate to the best of its knowledge and relates only to the specific material designated herein.