Jet Force Wasp & Hornet Killer
Item Number: 2660-0703-21
U.S. Department Of Labor
Occupational Safety And Health Administration
Required Under USDL Safety And Health Regulations
(29 CFP 1910.1200 "Hazards Communication Standard")
Manufactured For: Gabriel First Corp.
Emergency Telephone: 1-800-424-9300
Address: 233 W Commercial Street East Rochester, NY 14445
Trade Name & Synonyms: Jet Force Wasp & Hornet Killer Aerosol
Prepared On: 05/02/200 5
Component(s)/ Chemical Names CAS Registry No % TLV PEL
Tetramethrin 7696-12-0 <1.0 ND ND
d-CisTrans Phenothrin 26002-80-2 <1.0 ND ND
Isoparaffinic Solvent 64742-47-8 >95.0
Carbon Dioxide 124-38-9 2-4 5000 5000
Boiling Point: NA
Specific Gravity (H2O=1): <1
Vapor Pressure: 120@130F
Percent, Volatile By Volume(%):
Vapor Density(Air=1): >1
Evaporation Rate: <1
Solubility In Water: Negligible
Appearance And Odor: Clear pale yellow solution, petroleum odor.
Special Fire Fighting Procedures: Containers should be cooled with water to prevent vapor pressure build up. Use shielding to protect from bursting containers.
Flash Point/Method Used:
Flammable Limits: LEL: 0.6 UEL: 7.0
Extinguishing Media: Carbon Dioxide, foam, dry chemical.
Effects Of Overexposure:
Eyes: May irritate and burn eyes.
Skin: prolonged or repeated exposure can cause irritation and reddening of skin.
Ingestion: can cause stomach irritation resulting in nausea, cramps, and vomiting.
Inhalation: can cause nasal and respiratory irritation and nervous system disorders.
Emergency First Aid Procedures:
Eyes: Flush immediately with water for at least 15 minutes. If irritation persist, call a physician.
Skin: Remove contaminated clothing. Wash with soap & water.
Inhalation: Remove victim to fresh air. If breathing is difficult, give CPR. Get medical help.
Ingestion: Get medical help ASAP.
Stability Conditions To Avoid
Materials To Avoid: Strong oxidizing agents, heat and open flame.
Hazardous Decomposition Products: Carbon Monoxide, carbon dioxide, and additional toxic chemicals may be formed in small amounts.
Hazardous Polymerization Conditions To Avoid
N/A Do not store above 54C-130F. Keep away from heat, direct sunlight, open flames, or sparks. Dropping of containers may cause burning.
Steps To Be Taken In Case Material Is Released Or Spilled: Remove source of flames, spark, or heat. Soak up spill with an inert absorbent and dispose of material in a designated disposal container.
Waste Disposal Method: Do not puncture or incinerate. When contents are depleted, depress button until all gas is expelled and dispose of container in accordance with local, state, and federal regulations.
Respiratory Protection(Type): None required.
Ventilation: Local exhaust is recommended.
Protective Gloves: Chemical Resistant..
Eye Protection: Chemical Safety Glasses.
Other Protective Equipment: Wear impervious clothing.
Precautions To Be Taken In Handling And Storing: Avoid breathing vapor. Keep away from heat or open flame. Use with adequate ventilation. Do not expose contents to temperatures above 54C-130F. Do not puncture or incinerate.
Other Precautions: Please read entire label before using, it is your best guide to using the product in its most effective manner.
This information is given in good faith, but no warranty expressed or implied is made. Our company believes that it is accurate to the best of its knowledge and relates only to the specific material designated herein.