Liquid Snow Melter & Deicer

Item Numbers: 45405, 45455


U.S. Department Of Labor

Occupational Safety And Health Administration


Required Under USDL Safety And Health Regulations

(29 CFP 1910.1200 "Hazards Communication Standard")


Section I

Manufactured For: Gabriel First Corp.

Emergency Telephone: 1-800-424-9300

Address: 233 W Commercial Street, East Rochester, NY 14445

Trade Name & Synonyms: Liquid Snow Melter & Deicer

Chemical Family: Glycol Blend

Prepared On: 09/11/2005



1 0 0 B


Section II - Product & Component Data

Chemical Names CAS Registry No. % / Wt. TLV

Ethylene Glycol 107-21-1 To 55 50ppm

Trisodium Phosphate 10101-89-0 To 2 N/E

Urea 57-13-6 To 23 10mg/M

Water 7732-18-5 Q.S NONE


Section III - Physical Data

Boiling Point: 212-220 F

Specific Gravity (H2O=1): 1.12

Vapor Pressure: N/D

Percent, Volatile By Volume (%): 76%

Vapor Density (Air=1): >1

Evaporation Rate: (H2O=1): N/A

Solubility In Water: Complete

Appearance And Odor: Blue Liquid, Faint Ammonia Odor.

pH: 9.3


Section IV - Fire And Explosion Hazard Data

Special Fire Fighting Procedures: Floor may be slippery.

Flash Point: Exceeds 200 F

Flammable Limits: Non-Flammable.

Extinguishing Media: Water, CO2

Unusual Fire And Explosion Hazards: None.


Section V - Health Hazard Data

Effects Of Overexposure:

Eyes: May cause irritation.

Skin: May cause irritation.

Inhalation: May cause irritation to upper tract.

Ingestion: May cause irritation of mucous membranes.

Exposure Limits: N/E

Carcinogenicity: NTP: Not listed.

IARC: Not listed. OSHA: Not regulated.

Medical Conditions Aggravated By Exposure:

Person with present skin disorder may be more susceptible to irritation.

Emergency First Aid Procedures:

Eyes: Flush with running water for 15 minutes.

Skin: Wash off with soap and water.

Inhalation: Move subject to fresh air.

Ingestion: Do NOT induce vomiting. Obtain medical attention immediately.

Drink at least 2 glasses of water. If unconscious or in convulsion, take to hospital or physician.


Section VI - Reactivity Data

Stability Conditions To Avoid: Stable

Incompatibility - Materials To Avoid: None.

Hazardous Decomposition Products: Normal products of combustion.

Hazardous Polymerization - Conditions to Avoid: Will not occur.


Section VII - Spill Or Leak Procedures

Steps To Be Taken In Case Material Is Released Or Spilled: Dike and contain spill, absorb the liquid.

Waste Disposal Method: Scoop or shovel solid material into a suitable container for recovery or disposal. Area may become slippery. Flush cleaned area with water. Dispose of according to local, state and federal requirements.


Section VIII - Special Protection Information

Respiratory Protection: No special requirements.

Ventilation: Good ventilation required.

Protective Gloves: Chemical resistant.

Eye Protection: Goggles or Face Shield.


Section IX - Special Precautions

Precautions To Be Taken In Handling And Storing:

Keep out of reach of children. Use only in well ventilated area.

For institutional and industrial use only. For use by trained personnel only.

Store and keep in closed container, in a cool place. Store below 140 F.



This information is given in good faith, but no warranty expressed or implied is made. Our company believes that it is accurate to the best of its knowledge and relates only to the specific material designated herein.