Pumice Scouring Stick

Item Number:100714

 

U.S. Department Of Labor

Occupational Safety And Health Administration

MATERIAL SAFETY DATA SHEET

Required Under USDL Safety And Health Regulations

(29 CFP 1910.1200 "Hazards Communication Standard")

 

Section I

Manufactured For:  Gabriel First Corp.

Emergency Telephone:  1-800-424-9300

Address:  233 W Commercial Street  East Rochester, NY   14445

Chemical Name & Synonyms: Cleaning, Compound, Liquid

Trade Name & Synonyms: Pumice Scouring Stick

Prepared On:  6/30/2005

 

Section I - Hazardous Ingredients/Identity Information

 

Section II - Product & Component Data

Component(s)/ Chemical Names                                      CAS Registry No                              %                         TLV                PEL

Pumice (Volcanic Glass)

There is No Free Crystalline Silica Present

 

Section III - Physical Data

Boiling Point:  N/A

Specific Gravity (H₂O=1):  N/A

Melting Point:  2390° F

Vapor Pressure:  N/A

Percent, Volatile By Volume (%):  N/A

Vapor Density (Air=1):  N/A

Evaporation Rate:  N/A

Solubility In Water:  Not Soluble

Appearance And Odor:  Odorless Solid

 

Section IV - Fire And Explosion Hazard Data

Special Fire Fighting Procedures:  None.

Unusual Fire and Explosion Hazards:  None

Flash Point/Method Used:  N/A

Flammable Limits:  N/A

LEL:  N/A     UEL:  N/A

Extinguishing Media:  N/A

 

Section V - Health Hazard Data

Route(s) of Entry:

Inhalation?  Yes

Skin?  No

Ingestion:  Yes

Health Hazards (Acute and Chronic):  Dry sawing or grinding may result in the release of dust particles which, acute, may cause irritation of eyes, nose or throat and chronic, may result in lung disease (Silicosis) if exposed for prolonged time.

Carcinogenicity:                            NTP?                         IARC Monographs?                             OSHA Regulated?

                                                             No                                           No                                                           No

 

Signs and Symptoms of Exposure:  Irritation of eyes, nose and throat or shortness of breath.

Medical Conditions Generally Aggravated by Exposure:  Pre-existing lung disease such as Emphysema

or Asthma.

Emergency First Aid Procedures:  Irrigate eyes generously with clean water for 15 minutes.  If irritation persists call a physician.

 

Section VI - Reactivity Data

Stability Conditions To Avoid

Stable                                    None

Materials To Avoid:  None

Hazardous Decomposition Products:  None

Hazardous Polymerization                        Conditions To Avoid

Will Not Occur                                     None

 

Section VII - Spill Or Leak Procedures

Steps To Be Taken In Case Material Is Released Or Spilled:  Sweep up and properly dispose.

Waste Disposal Method:  Dispose as common waste.

Precautions To Be Taken in Handling and Storing:  None

Other Precautions:  Wear NIOSH approved respirator and tight fitting goggles.  When dry sawing or grinding, or saw and grind when wet.

 

Section VIII - Special Protection Information

Control Measures (When Sawing or Grinding)

Respiratory Protection (Type):  NIOSH Approved Particulate Respirator

Ventilation:  Mechanical (General) in Confined Area

Protective Gloves:  When Required

Eye Protection:  Tight Fitting Goggles

Other Protective Equipment:  None

Work/Hygienic Practices:  N/A

 

Section IX - Special Precautions

Precautions To Be Taken In Handling And Storing:  None

 

 

This information is given in good faith, but no warranty expressed or implied is made.  Our company believes that it is accurate to the best of its knowledge and relates only to the specific material designated herein.