Stat-Finish Static Dissipative Floor Finish

Item Number: 1200-2103

 

U.S. Department Of Labor

Occupational Safety And Health Administration

MATERIAL SAFETY DATA SHEET

Required Under USDL Safety And Health Regulations

(29 CFP 1910.1200 "Hazards Communication Standard")

 

Section I

Manufactured For:  Gabriel First Corp.

Emergency Telephone:  1-800-424-9300

Address:  233 W Commercial Street  East Rochester, NY   14445

Trade Name & Synonyms: Stat-Finish

Prepared On:  07/02/2005

NPCA Hazardous Materials Identification System:

                                        HEALTH                        FLAMMABILITY                                    REACTIVITY                               MPP

                                               1                                              0                                                              0                                              1

 

Section II - Product & Component Data

Chemical Names                                                                         CAS                               %

Diethylene Glycol Ethylether                                                     111-90-0                         2-3

Dipropylene Glycol Monomethylether                                     34590-94-8                     3-4

Polyacrylic Resin, Wetting Agent & Water                            N/A                                90-95

 

Section III - Physical Data

Boiling Point: Unknown.

Specific Gravity (H₂O=1): 1.036

Vapor Pressure: Unknown.

Percent, Volatile By Volume(%):Unknown.

Vapor Density(Air=1): Unknown.

Evaporation Rate: 1 est. (Acetate = 1.0)

Solubility In Water: Dilutable

Appearance And Odor: Milky, White emulsion.

pH:  8.7 +/- 8.9

 

Section IV - Fire And Explosion Hazard Data

Special Fire Fighting Procedures: None.

Flash Point/Method Used: 100 SCT

Flammable Limits:  Unknown

Extinguishing Media: N/A

Unusual Fire And Explosion Hazards: None.

 

Section V - Health Hazard Data

Effects Of Overexposure:

Eyes:  Slightly irritating to eyes.

Swallowing: May be harmful or fatal if swallowed.

Medical Conditions Aggravated By Exposure: N/A

Emergency First Aid Procedures:

Eyes:  Flush immediately with water for at least 15 minutes. Call a physician.

Skin:  Wash with soap & water.

Ingestion: Drink copious amounts of water / milk and contact physician.

Inhalation: Remove exposed person to fresh air. Treat symptomatically.

 

Section VI - Reactivity Data

Stability                 Conditions To Avoid

Stable

Materials To Avoid: None.

Hazardous Decomposition Products: N/A

Hazardous Polymerization                        Conditions To Avoid

Will not occur.

 

Section VII - Spill Or Leak Procedures

Steps To Be Taken In Case Material Is Released Or Spilled:

Avoid skin and eye contact.  Residue may be mopped/scraped up and absorbed onto material.  Residue may be slippery and may be rinsed away with copious amounts of water.

Waste Disposal Method: rinse with copious amounts of water or dispose of in landfill.

 

Section VIII - Special Protection Information

Respiratory Protection (Type): None required if good ventilation is maintained.  Otherwise, wear self- contained breathing apparatus (pressure demand, MSHA/NIOSH approved or equivalent).

Ventilation: Normal.

Protective Gloves: None.

Eye Protection: Glasses.

Other Protective Equipment:

 

Section IX - Special Precautions

Precautions To Be Taken In Handling And Storing: keep from freezing, store in cool, dry place out of direct sun.  Do not freeze.

 

 

This information is given in good faith, but no warranty expressed or implied is made.  Our company believes that it is accurate to the best of its knowledge and relates only to the specific material designated herein.