Tough Color
Tint (All Colors)
Item
Numbers: 2483-0315, 2483-0323, 2483-0353, 2483-0355, 2483-0357, 2483-0359,
2483-0361, 2483-0363, 2483-0366
U.S. Department Of Labor
Occupational Safety And
Health Administration
Required Under USDL
Safety And Health Regulations
(29 CFP 1910.1200
"Hazards Communication Standard")
Manufactured For: Gabriel First Corp.
Emergency Telephone: 716/381-7000
Address: 233 W Commercial Street East Rochester, NY 14445
Chemical Name & Synonyms:
Trade Name &
Synonyms:
Tough Color (All Colors)
Prepared On: 01/28/2005
Proper Shipping Name:
HMIS
RATING
HEALTH FLAMMABILITY REACTIVITY MPP
. . . .
Component(s)/ Chemical
Names CAS % PEL TLV MMHG
Crystalline
Silica1 4808-60-7 <1 10 10
Butyl
Acetate 123-86-4 <1 150 150 STEL 200
Dipropylene
Glycol Methyl Ether 34590-94-8 1 100 100 STEL 150
Propylene
Glycol Mono Methyl Ether Acetate
108-65-6 1 NE NE NE
Pyrophosphoric
Acid 7664-38-2 <1 1.00 1.00 STEL 3.00
Ethylbenzene 100-41-4 <1 100 100 STEL 125
Xylene 1330-20-7 <1 100 100 STEL 150
Nonylphenoxypolyrthoxyethanol 9016-45-9 5 NE NE
Bone
Black 8021-99-6 5 3 3
Iron
Oxide 1332-37-2 45 10.00 5.00
Iron
Oxide 1309-37-1 1 5.00
Titanium
Dioxide 13463-67-7 5 10.00 10.00
Polyalkyene
Oxide Polyol 25791-96-2 5 10.00 10.00
Boiling Point: 286 DEG F
Specific Gravity (H2O=1): 1.75
Vapor Pressure: 2.0 AT 68 DEG F
Percent, Volatile By
Volume(%):
8.06
Vapor Density(Air=1): 5.1
Evaporation Rate: 1.0
Solubility In Water: No
Appearance And Odor:
pH:
Special Fire Fighting
Procedures:
Firefighters
must wear self contained breathing apparatus 0
Air
masks. Containers exposed to fire
should be kept cool
With
water spray.
Flash Point/Method Used: 210 TCC/PM DEG F
Flammable Limits: LEL
1.00 VEL 14.00
Extinguishing Media: in case of fire, use water spray (fog)
Alcohol foam, dry chemical, or carbon dioxide.
Water
spray may be used to cool containers and keep exposed material from being
damaged by fire.
Unusual Fire And
Explosion Hazards:
Closed
containers may explode due to build up of pressure
When
exposed to heat.
Effects Of Overexposure:
ACUTE: can be absorbed through the skin. harmful if inhaled. may affect the brain, nervous system or
respiratory
system, causing dizziness, headache, nausea or respiratory irritation.
SUSPECT CANCER
HAZARD. CONTAINS INGREDIENTS WHICH MAY CAUSE
CANCER. RISK OF CANCER DEPENDS UPON DURATION AND
LEVEL OF
EXPOSURE. MAY CAUSE EYE DAMAGE AND PAIN. OVEREXPOSURE TO
INGREDIENTS IN THIS PRODUCT MAY CAUSE IRRITATION OF GASTROINTESTINAL TRACT, EYE
IRRITATION, SKIN IRRITATION, RESPIRATORY TRACT IRRITATION, FATALITY IF INHALED.
Chronic: NOTICE:
reports
have associated repeated and prolonged occupational overexposure
Medical Conditions
Aggravated By Exposure: Any respiratory or skin condition.
Emergency First Aid
Procedures:
Eyes: Flush immediately with water for at least 15
minutes. Call a physician.
Skin: Wash immediately with
soap & water for at least 15 minutes.
Ingestion: Get medical attention immediately.
Inhalation: Remove exposed person
to fresh air.
Stability Conditions To Avoid
Stable
Materials To Avoid: Strong oxidizers
Hazardous Decomposition
Products:
Carbon Monoxide/Dioxide
Hazardous
Polymerization Conditions
To Avoid
Will not occur N/A
Steps To Be Taken In Case
Material Is Released Or Spilled:
Ventilate
area. Avoid breathing of vapors. Use self contained breathing apparatus or air
mask for large spills in a confined area. Eliminate ignition sources. Remove
with inert absorbent and non sparking tools. Avoid contact with eyes.
Waste Disposal Method: Dispose in chemical
disposal area or in a manner that complies with local, state and federal
regulations. Do not incinerate closed containers.
Respiratory
Protection(Type):
None required if good ventilation is maintained. Otherwise, wear a
self-contained breathing apparatus (pressure demand, MSHA/NIOSH approved or
equivalent.
Ventilation: Required for handling
in a confined area. Ventilation equipment should be explosion proof. Eliminate
ignition sources.
Protective Gloves: Usual hand protection
for handling resin products.
Eye Protection: Safety glasses/goggles
with side shields.
Other Protective
Equipment:
Usual protective clothing for handling resin products.
Precautions To Be Taken
In Handling And Storing: Containers should be grounded/bonded when pouring. Avoid
free falling liquid in excess of a few inches. Keep away from heat, sparks and
open flames. Keep container closed when not in use. Do not store above 120 DEG
F. Based on the product flash point and vapor pressure suitable storage should
be provided in accordance with OSHA regulation 1910. 106. Empty containers may
contain product residue, including flammable or explosive vapors. Do not cut,
puncture or weld near or on container. All label warnings must be observed
until the container has been cleaned or reconditioned.
This information is given in good faith, but no
warranty expressed or implied is made.
Our company believes that it is accurate to the best of its knowledge
and relates only to the specific material designated herein.