Premier Sealer
Item Numbers: 2255-0301,
2255-0305, 2255-0355
U.S. Department Of Labor
Occupational Safety And
Health Administration
Required Under USDL
Safety And Health Regulations
(29 CFP 1910.1200
"Hazards Communication Standard")
Manufactured For: Gabriel First Corp.
Emergency Telephone: 1-800-424-9300
Address: 233 W Commercial Street, East Rochester,
NY 14445
Trade Name &
Synonyms: Premier Concrete Seal
Chemical Family: Polymer Blend
Prepared On: 01/23/2005
HMIS
Rating
HEALTH FLAMMABILITY REACTIVITY MPP
1 0 0 B
Chemical Names CAS
Registry No. %
/ Wt. TLV
Tributoxyethylphosphate 78-51-3 To
3 N/E
Diethylene Glycol
Monomethyl Ether 111-73-10 To 5 N/E
Waterborne Urethane Proprietary To 10 N/E
Acrylic Copolymer Proprietary To 40 N/E
Polyethylene Blend Mixture To
11 N/E
Water 7732-18-5 To 31 NONE
Boiling Point: 212°F
Specific Gravity (H2O=1): 1.035
Vapor Pressure: N/D
Percent, Volatile By
Volume (%): 78%
Vapor Density (Air=1): Same as Water
Evaporation Rate: N/A
Solubility In Water: Complete
Appearance And Odor: Opaque, Off-White Liquid, Acrylic Odor
pH: 9
Special Fire Fighting
Procedures: Floor may be slippery.
Flash Point/Method Used: N/A
Flammability: Non-Flammable
Extinguishing Media: Water, CO2
Unusual and Explosion
Hazards: None
Effects Of
Overexposure:
Eyes:
May cause irritation.
Skin:
May cause irritation.
Inhalation: May cause irritation to upper tract.
Medical Conditions Aggravated By Exposure:
Person with present skin disorder may be
more susceptible to irritation.
Exposure Limits: N/E
Carcinogenicity: IARC: Not listed.
OSHA:
Not regulated.
Emergency
First Aid Procedures:
Eyes: Flush with running
water for at least 15 minutes.
Skin: Wash off with soap
and water.
Inhalation: Remove exposed person to fresh air.
Ingestion: Do NOT induce
vomiting. Drink plenty of water.
If unconscious or in
convulsion, take to hospital or physician.
Stability Conditions To Avoid
Stable
Materials
To Avoid: None.
Hazardous
Decomposition Products: Normal products of
combustion.
Hazardous
Polymerization Conditions
To Avoid
Will not occur N/A
Steps To
Be Taken In Case Material Is Released Or Spilled: Dike
and contain spill, absorb the liquid.
Waste
Disposal Method: Scoop or shovel solid
material into a suitable container for recovery or disposal. Area may become slippery. Flush cleaned area with water. Dispose of according to local, state and
federal requirements.
Respiratory
Protection (Type): No special requirements.
Ventilation: Good ventilation required.
Protective
Gloves: Chemical resistant.
Eye
Protection: Goggles or Face Shield.
Precautions
To Be Taken In Handling And Storing:
Keep
out of reach of children. For use by
trained personnel only.
Use
only in well ventilated area. For
institutional and industrial use only.
Store
and keep in closed container, in a cool place.
Keep from freezing.
This
information is given in good faith, but no warranty expressed or implied is
made. Our company believes that it is accurate to the best of its knowledge and
relates only to the specific material designated herein.