Winter Rinse Ice Melt Remover

Item Numbers: 4546-0305, 4546-0355

 

U.S. Department Of Labor

Occupational Safety And Health Administration

MATERIAL SAFETY DATA SHEET

Required Under USDL Safety And Health Regulations

(29 CFP 1910.1200 "Hazards Communication Standard")

 

Section I

Manufactured For:  Gabriel First Corp.

Emergency Telephone:  1-800-424-9300

Address:  233 W Commercial Street  East Rochester, NY   14445

Trade Name & Synonyms: Winter Rinse Ice Melter Film Remover

Prepared On: 08/17/2012

HMIS RATING

                        HEALTH                        FLAMMABILITY                                    REACTIVITY                               MPP

                               2                                              0                                                              0                                              B

 

Section II - Product & Component Data

Chemical Names                                                                             CAS                     %                      PEL        TLV        LEL

Tetrasodium Ethyl enediamineteta acetate                                64-02-8                                                    Not Established

 

Other ingredients in this product are: Less than 1% by weight o less than 0.1% for carcinogens.  Not hazardous Declared to be Trade Secret

 

Section III - Physical Data

Boiling Point:  212'F

Specific Gravity (H₂O=1): 1.060 +- 0.005

Vapor Pressure: unknown

Percent, Volatile By Volume (%):

Vapor Density(Air=1):  unknown

Evaporation Rate: (H₂O=1): about the same as water

Solubility In Water: Complete

Appearance And Odor: liquid, pleasant odor.

 

Section IV - Fire And Explosion Hazard Data

Special Fire Fighting Procedures: wear self-contained breathing apparatus & complete personal equipment.

Flash Point/Method Used: none to boiling.

Flammable Limits: unknown

Extinguishing Media: CO2, dry chemical, foam, water spray.

Unusual Fire And Explosion Hazards: none.

 

Section V - Health Hazard Data

Effects Of Overexposure:

Eyes: pain & moderate irritation.

Skin: slight irritation.

Medical Conditions Aggravated By Exposure: none known.

Emergency First Aid Procedures:

Eyes: Flush with an eye neutralizer then with water for at least 15 minutes and consult a physician.

Skin: remove contaminated clothing & wash with plenty of water.

Inhalation: remove exposed person to fresh air.

Ingestion: drink large quantities of milk or water. Call a physician.

 

Section VI - Reactivity Data

Stability                 Conditions To Avoid

Stable

Incompatibility - Materials To Avoid: strong oxidizers.

Hazardous Decomposition Products: carbon monoxide and other unidentified organic gases may occur during incomplete combustion.

Hazardous Polymerization - Conditions to Avoid

Will not occur.

 

Section VII - Spill Or Leak Procedures

Steps To Be Taken In Case Material Is Released Or Spilled: flush with water for large spills, contain spill and collect for disposal.

Waste Disposal Method: dispose of in accordance with applicable federal, state and local ordinances.

 

Section VIII - Special Protection Information

Respiratory Protection (Type): not needed under normal conditions of use.

Ventilation: mechanical.

Protective Gloves: rubber

Eye Protection: safety glasses/goggles.

Other Protective Equipment: other protective clothing may be needed if splashing or spray drift occurs.

 

Section IX - Special Precautions

Precautions To Be Taken In Handling And Storing: do not get in eyes, on skin, on clothing keep container closed use with adequate ventilation wash thoroughly after handling.

 

 

This information is given in good faith, but no warranty expressed or implied is made.  Our company believes that it is accurate to the best of its knowledge and relates only to the specific material designated herein.